FUGAMAX® FLEX
FUGAMAX® Flex is a silicone-enhanced, high-performance, cementitious, colored, flexible joint filler.
Complies with EN 13888 standard as CG2WA class.
CG: Cementitious grout
2: Improved grout
W: Reduced water absorption
A: High abrasion resistance
Areas of Application
• Interior and exterior applications, horizontal and vertical surfaces
• For filling 1–8 mm joints of ceramic, granite, marble and mosaic
• Areas such as kitchens and corridors
• Wet areas such as bathrooms, toilets, balconies and terraces
• Underfloor heating systems
• Cold storage rooms
• Swimming pools and water tanks
• Areas with heavy pedestrian and load traffic
Advantages
• Antibacterial, prevents mold and fungus formation
• Low water absorption due to silicone additives
• Provides excellent adhesion to tile edges without cracking
• Flexible
• Easy to prepare and apply
• Maintains its color for a long time
• Does not scratch sensitive surfaces
• Available in a wide range of colors
• Resistant to freeze-thaw cycles
Technical Specifications
|
General Information |
|
|
Material composition |
Mineral fillers, cement, silicone and special chemical additives |
|
Appearance |
White or colored fine powder |
|
Density |
~1.55 kg/lt |
|
Performance Data (EN 12808) |
|
|
Compressive strength |
≥ 25 N/mm² |
|
Flexural strength |
≥ 5 N/mm² |
|
Abrasion resistance |
≤ 1000 mm³ |
|
Shrinkage value |
≤ 3 mm/m |
|
Water absorption |
30 minutes ≤ 2 g, 240 minutes ≤ 5 g |
|
Application Data |
|
|
Application temperature |
+5°C / +35°C |
|
Service temperature |
−20°C / +80°C |
|
Mixing ratio |
~0.30–0.33 lt water / 1 kg powder |
|
Pot life |
~1 hour |
|
Ready for service |
24 hours |
|
Joint width |
1–8 mm |
|
Consumption |
Depends on tile size and joint width |
|
Safety Information |
|
|
Reaction to fire class (EN 13501-1) |
A1 |
|
Hazardous substances |
Refer to SDS |
The stated technical values are obtained at +23°C ambient temperature and 50% relative humidity conditions. High temperatures shorten the time, low temperatures extend it.