CERAMAX® PRO

CERAMAX® Pro is a high performance, cement based adhesive mortar for bonding marble, granite and ceramic, containing mineral fillers, cement and specially modified chemicals, with reduced slip property.
Complies with EN 12004-1 standard as C2T class.
C2: Improved cement based adhesive
T: Reduced slip property

Areas of Application
●    Interior and exterior areas, horizontal and vertical surfaces
●    Medium and large format ceramic, granite and marble applications
●    Natural stone and decorative brick applications
●    Cement based surfaces exposed to high temperature differences
●    Tile on tile applications
●    Swimming pools and large water tanks
●    Terraces and balconies
●    Areas exposed to heavy pedestrian and load traffic

Advantages
●    High adhesion performance
●    Does not slip on vertical surfaces thanks to its thixotropic structure
●    High stability and strength
●    Easy to prepare and apply
 

 

General Information

Material composition

Mineral fillers, cement, special chemical additives

Appearance

Grey powder

Density

~1.79 kg/L

Performance Data (EN 12004-2)

Initial adhesion strength

≥ 1.0 N/mm²

After water immersion

≥ 1.0 N/mm²

After heat aging

≥ 1.0 N/mm²

After freeze-thaw

≥ 1.0 N/mm²

Open time (20 min)

≥ 0.5 N/mm²

Slip

≤ 0.5 mm

Application Data

Application temperature

+5°C / +35°C

Service temperature

−20°C / +80°C

Mixing ratio

6.5 – 7 L water / 25 kg

Pot life

~2 hours

Open time

≥ 20 min

Adjustment time

~10–15 min

Grouting time

24 hours

Ready for service

Walls: 24 h / Floors: 48 h

Consumption

~5–6 kg/m²

Safety Data

Reaction to fire (EN 13501-1)

A1

Hazardous substances

Refer to SDS


The figures stated above are valid at an ambient temperature of +23°C and 50% relative humidity. Higher temperatures shorten the time, while lower temperatures extend it.